Charge The Battery; Get Started - Nokia BH-105 Manual

Hide thumbs Also See for BH-105:
Table of Contents

Advertisement

Available languages

Available languages

Get started

The headset contains the following
parts shown on the title page: power
key (1), earloop (2), answer/end
key (3), earpiece (4), indicator
light (5), charger connector (6),
and microphone (7).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the device are magnetic.
Metallic materials may be attracted to
the device. Do not place credit cards or
other magnetic storage media near the
device, because information stored on
them may be erased.

Charge the battery

Before charging the battery, carefully
read "Battery and charger
information".
Warning: Use only chargers
approved by Nokia for use
with this particular model. The use of any
other types may invalidate any approval
or warranty, and may be dangerous.
When you disconnect the power cord of
any accessory, grasp and pull the plug,
not the cord.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector. The red
indicator light is displayed during
charging. Charging the battery
fully may take up to 2 hours.
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset, then from the
wall outlet.
The fully charged battery has power
for up to 5 hours and 30 minutes of
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents