Table of Contents
Advertisement
20
Care and cleaning
Cleaning heat exchanger filters
If the indicator clean base filters
of the appliance must be cleaned, i.e. after each 5 drying cycles. Both filters are located in
the appliance base.
Water can collect in the filter housing therefore it is normal for the heat exchanger fluff
filters to become wet.
• Never operate the dryer without the fluff filters.
• Clogged filters cause higher energy consumption (drying cycle elongation) and dryer
damage.
• A dirty heat pump can only be cleaned up by means of a costly process.
1. Open loading door
2. Open door in plinth: To do this, press the
release button on the bottom of the door
aperture and open the door in the plinth
to the left.
3. Pull filter housing out of the base by the
handle.
4. To clean the fluff filter: Remove filter
from filter housing. To do this, press the
pressure points on the sides and pull the
filter frame up and out of the housing.
Remove fluff from the fluff filter with a
damp hand.
lights up, the heat exchanger fluff filters in the base
2
1
Hide quick links:
Advertisement
Table of Contents
