Helpful Hints And Tips - Zanussi ZIT64BV User Manual

Touch the symbol . The symbol
seconds.
The Timer still operates.
Touch the symbol to switch off this function. The heat
setting that you set before comes on.
When you switch off the appliance, you also switch off
this function.
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device
• Start the hob with
• Touch
until the acoustic signal. . The symbol
comes on. Switch off the appliance.

Helpful hints and tips

Cookware
• The bottom of the cookware must be as thick and
flat as possible.
• Cookware made of enamelled steel and with aluminium
or copper bottoms can cause discoloration on glass
ceramic surface.
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless
steel, a multi-layer bottom (marked as correct by a
manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic,
porcelain.
Cookware is correct for an induction hob if ...
• ... some water boils very quickly on a zone set to the
highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and
flat as possible.
Cookware dimensions : induction cooking zones adapt to
the dimension of the bottom of the cookware automatically
8
comes on for 4
. Do not set the heat settings .
Switching off the child safety device
• Start the hob with
the acoustic signal.
• Switch off the appliance.
Overriding the child safety device for one cooking session
• Start the hob with
• Touch
until the acoustic signal. The symbol
comes on. Set the heat setting in less than 10 sec-
onds. You can operate the hob. When you stop the hob
with , the child safety device operates again.
to some limit. But, the magnetic part of the bottom of the
cookware must have a minimum diameter of approxi-
mately 3/4 of the cooking zones.
Operating noises
If you can hear
• cracking noise: cookware is made of different materials
(Sandwich construction).
• whistling: you use one or more cooking zones with
high power levels and the cookware is made of different
materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.
Energy saving
• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start
it.
• Stop the cooking zones before the end of the cooking
time to use residual heat.
• The bottom of pans and cooking zones must have the
same dimension.
Examples of cooking applications
The data in the table is for guidance only.
. comes on. Touch
comes on
. The symbol comes on.
until