HP Compaq 8510p Quickspecs page 18

QuickSpecs
Memory
667-MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 512 MB, 1024 MB, 2048 MB
Standard Memory
Optional Memory
Upgrades
Up to
1024 MB
1536 MB
2048 MB
4096 MB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party
memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. Full availability of 4 GB of memory requires Windows Vista Business 64-
bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is dependent upon your configuration, so that
above 3 GB all memory may not be available due to system resource requirements.
Memory Upgrades
1024 MB (1024 MB x 1 or 512 MB x 2)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
Support for up to 4096 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in both
memory slots.
HP 512-MB (DDR2 667 MHz) SODIMM
HP 1024-MB (DDR2 667 MHz) SODIMM
HP 2048-MB (DDR2 667 MHz) SODIMM
DA - 12713 EMEA — Version 18 — July 14, 2008
Slot 1
1024 MB
1024 MB
1024 MB
2048 MB
HP Compaq 8510p Notebook PC
Slot 2
Empty
512 MB
1024 MB
2048 MB
EM993AA
EM994AA
EM995AA
Page 18