Configuration Information Factory Integrated Models - HP ProLiant BL25p Quickspecs
Server blade
Hide thumbs
Also See for ProLiant BL25p:
- Quickspecs (28 pages) ,
- User manual (118 pages) ,
- Deployment manual (54 pages)
Advertisement
QuickSpecs
Configuration Information Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
NOTE:
NOTE:
NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE:
NOTE:
NOTE: HP does not allow factory integration of options into standard models listed above.
NOTE:
Configure-to-order servers must start with a CTO Blade.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: FIO indicates that this option is only available as a Factory Installable Option.
NOTE:
NOTE:
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Models
Models
Models
Models
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Processors
Processors
Processors
Processors
HP ProLiant BL25p G2 CTO Blade
Configurable Model ships with:
Configurable Model ships with:
Configurable Model ships with:
Configurable Model ships with:
Two (2) embedded NC373i Multifunction Gigabit Network Adapters plus one (1)
additional 10/100 NIC dedicated to iLO 2 management
Integrated Smart Array E200i controller
NOTE: Controller cache module selection is required. Select either the standard 64
NOTE:
NOTE:
NOTE:
MB cache module or the optional 128 MB battery-backed write cache (BBWC)
module in step 2 below.
Two small form factor (SFF) SAS or SATA hot plug hard drive bays
Integrated Lights-Out 2 Standard Blade Edition
AMD Opteron™ processor Model 2220 (2.8 GHz, 95W) Processor Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 438213-L21 and one 438213-B21.
NOTE:
NOTE:
NOTE:
AMD Opteron processor Model 2218 (2.6 GHz, 95W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 409380-L21 and one 409380-B21.
NOTE:
NOTE:
NOTE:
AMD Opteron processor Model 2216 (2.4 GHz, 95W) Option Kit, FIO Base
NOTE:
NOTE:
NOTE:
NOTE: If 2 processors are desired, select one 409381-L21 and one 409381-B21.
AMD Opteron processor Model 2210 (1.8 GHz, 95W), Option Kit, FIO Base
NOTE:
NOTE: If 2 processors are desired, select one 415619-L21 and one 415619-B21.
NOTE:
NOTE:
Low Power AMD Opteron processor Model 2216 HE (2.4 GHz, 68W) Option Kit,
FIO Base
NOTE: If 2 processors are desired, select one 415620-L21 and one 415620-B21.
NOTE:
NOTE:
NOTE:
Low Power AMD Opteron processor Model 2214 HE (2.2 GHz, 68W) Option Kit,
FIO Base
NOTE:
NOTE:
NOTE: If 2 processors are desired, select one 409383-L21 and one 409383-B21.
NOTE:
Low Power AMD Opteron processor Model 2212 HE (2.0 GHz, 68W) Option Kit,
FIO Base
NOTE: If 2 processors are desired, select one 415621-L21 and one 415621-B21.
NOTE:
NOTE:
NOTE:
Low Power AMD Opteron processor Model 2210 HE (1.8 GHz, 68W) Option Kit,
FIO Base
NOTE: If 2 processors are desired, select one 432811-L21 and one 432811-B21.
NOTE:
NOTE:
NOTE:
DA - 12569
Canada — Version 10 — December 14, 2007
HP ProLiant BL25p Generation G2 (G2) Server Blade
HP ProLiant BL25p Generation G2 (G2) Server Blade
HP ProLiant BL25p Generation G2 (G2) Server Blade
HP ProLiant BL25p Generation G2 (G2) Server Blade
404839-B21
438213-L21
409380-L21
409381-L21
415619-L21
415620-L21
409383-L21
415621-L21
432811-L21
Page 12
Advertisement
