Table of Contents
Advertisement
Positioning
This appliance should only be installed at a location where the ambient
temperature corresponds to the climate classification indicated on the
rating plate, which is located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for each
climate classification:
SN +10°C to + 32°C
N
+16°C to + 32°C
ST +18°C to + 38°C
T
+18°C to + 43°C
For correct operation this appliance
must be located in a dry atmosphere,
away from heat sources, e.g. cookers,
radiators, boilers and direct sunlight.
You should also ensure that air can
circulate freely around the back and
the top of the cabinet. There should
be 100mm (4") between the top of
the cabinet and any overhanging
kitchen furniture. Alternatively allow
50mm (2") between the top of the
cabinet and any overhanging
kitchen furniture and a gap of
25mm (1") on either side of the
appliance.
Do
not
underneath. The back of the cabinet
may be placed close to the wall but
must not touch it. DO NOT install in
places with restricted ventilation.
Adjust the level of the appliance by
screwing out the adjustable foot, or
feet, at the bottom of the cabinet
using your fingers.
Rear spacers
Fit the rear spacers contained in
the appliance to ensure escape of
heat generated during operation.
Proceed
illustrated in figures.
obstruct
the
in
the
sequence
space
23
Advertisement
Table of Contents
