Quick Start; Setting The Time And Date - Carrier edge Owner's Manual

QUICK START

Setting the time and day
You must set the time and date before you can use any of the thermostat's
programming features.
1. Open the door.
2. Press the set button on the left. The screen will show the
word clock on the left and the time on the bottom.
3. To set the hour, press the button underneath the
hour, then press the up or down button on the right.
Stop at the desired hour.
4. To set the minutes, press the button underneath the
minutes, then press the up or down button on the
right. Stop at the desired number.
5. To set the date, press the set button until the screen
displays the word calendar and the date on the bottom
of the screen.
10