Display Assembly Components - HP Mini 210 Maintenance And Service Manual

Display assembly components

NOTE: These procedures are for replacing the display assembly internal components for HP Mini
110 and Compaq Mini CQ10 models.
Description
Display assembly hinges and covers
Display bezel for HP Mini 110 models
Display bezel for Compaq Mini CQ10 models
Webcam module
Display panel
Display/webcam cable
Antenna cables
Display enclosure, Glossy Black for use with HP Mini 110 models
Display enclosure, Glossy Black for use with Compaq Mini CQ10 models
Display enclosure, Pacific Blue for use with HP Mini 110 models
Display enclosure, Sonoma Red for use with HP Mini 110 models
Before removing the display assembly components, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Disconnect the WLAN antenna cables from the WLAN module (see
7. Disconnect the WWAN antenna cables from the WWAN module (see
on page
8. Remove the keyboard (see
9. Remove the top cover (see
10. Remove the display assembly (see
Battery on page
Service door on page
47).
Keyboard on page
Top cover on page
44).
45).
53).
56).
Display assembly on page
Component replacement procedures
Spare part number
658506-001
658503-001
658504-001
658516-001
658511-001
658505-001
658498-001
658499-001
658518-001
658502-001
658500-001
WLAN module on page
WWAN module
61).
46).
63