Roaming - Audiovox CDM-8450 Owner's Manual

SETTING
SETTING

ROAMING

SET MODE
To select the Preferred System:
1. Press [MENU]
2. Select one of the following options:
Home only : Only within your home area or home
affiliated area.
Analog Only : Stays in the analog setting until the
hand set is powered on after being
powered off.
Automatic : Scan the radio channels based on the
Automatic setting.
Digital Only : Stays in the digital setting until the
hand set is powered on after being
powered off.
3. Press to save.
FORCE ANALOG
Temporarily forces phone to use Analog mode –
mode automatically ends in 10 minutes.
1. Press [MENU]
2. Select "Yes" or "No", then press
activate it.
NOTE: Phone maybe able to go into digital mode after
making a phone call when "Force Analog"
selected.
Page 80 - Chapter 4
.
.
[OK] to
SETTING
SETTING
NAM SETTING
Enables Auto NAM (Number Assignment Modules) or
manually selects a NAM.
AUTO NAM
Automatically switches phone to proper NAM when you
have multiple NAM registrations.
1. Press [MENU]
2. Select "Yes" or "No" then press
CHANGE NAM
Changes the NAM used by the phone when you have
multiple registrations.
1. Press [MENU]
2. Select "NAM1-BELL MOBILITY" or
"NAM2-BELL MOBILITY" then press
to save it.
.
[OK] to save it.
.
[OK]
Chapter 4 - Page 81