Audiovox CDM-8450 Owner's Manual page 38

SETTING
SETTING
RINGERS
Ringer types help you identify incoming calls and
messages:
VOICE CALL
1. Press [MENU]
2. Select "With Caller ID" or "No Caller ID" then
press [OK].
3. Select "Default" or "Downloads", then press
4. Select your desired ringer type, then press
to save it.
Default : Standard ringer types.
Downloads : Downloaded ringer types and familiar music.
MESSAGES
1. Press [MENU]
2. Select "Voice Mail" or "SMS" then press
3. Select your desired ringer type and,
press [OK] to save it.
Default : Standard ringer types.
Downloads : Downloaded ringer types and familiar music.
Page 70 - Chapter 4
ALERTS
Allows you to set an alert that sounds when any handset
changes occur.
SERVICE CHANGE
. Sounds an alert when leaving a service area and
entering a roaming service area.
1. Press
2. Select "Off" or "On", then press
[OK].
MINUTE ALERT
[OK] Sounds an alert every minute of a phone call.
1. Press
2. Select "Off" or "On", then press
CONNECT ALERT
. Notifies you that a call has been successfully placed.
1. Press
[OK].
2. Select "Off" or "On", then press
FADE ALERT
Sounds an alert when you are entering an area where
calls cannot be made due to weak signal strength. The
alert sounds in standby mode.
1. Press
2. Select "Off" or "On", then press
SETTING
SETTING
[MENU] .
[OK] to save it.
[MENU] .
[OK] to save it.
[MENU] .
[OK] to save it.
[MENU] .
[OK] to save it.
Chapter 4 - Page 71