Table of Contents
Advertisement
SC417J Chassis Manual
Jumper
PRI_MODE1
PRI_MODE2
FAN_MONITOR_DISABLE
FANFAIL_LED_DISABLE
BUZZER_ENB1
*The buzzer sound indicates that a condition requiring immediate attention has
occurred.
The buzzer alarm is triggered by any of the following conditions:
1. Hard drive failure
2. Fan failure
3. System temperature over 45º Celsius.
General Jumper Settings
Jumper Settings
Pins 2-3
Pins 2-3
Open: Enable (Default)
Closed: Disable
Open: Enable (Default)
Closed:Disable
Open: Disable
Closed: Enable
D-6
Note
Factory setting, do not change
Factory setting do not change
Enables/disables the fan speed
reporting.
Enables/disables the fan failure LED
Enables/disables buzzer*
Advertisement
Table of Contents
