SPECIFICATIONS ULX1 Transmitter Input Figure 1) Connector: TA4F Input Configuration: Unbalanced, active 18 kΩ with lavalier microphone Actual Impedance: 1 MΩ with instrument cable 6 Vp–p (+7 dBV) for 1% THD at minimum gain setting Maximum Input Level: using 1 kHz signal. Pin 1: Tied to Ground Pin 2: Tied to +5 V TA4F Connector Pin Assignments:...
Page 3
ULXS4 and ULXP4 Receiver Input Connector: Antenna Power Input Connector Type: IEC 320 Actual Impedance: 50 Ω –– Nominal Input Level: –95 to –30 dBm 15 Vdc Maximum Input Level: 10 Vp-p (+12 dBm) 17 Vdc (–20 dBm recommended) Pin Assignments: Shell = Ground IEC Standard Center = Signal...
Page 4
SYSTEM COMPATIBILITY GUIDE FOR FREQUENCY BAND M1 (662 - 698 MHz) SYSTÈMES COMPATIBLES EN FRÉQUENCE DANS LA BANDE M1 (662 - 698 MHz) SISTEMAS CON FRECUENCIAS COMPATIBLES EN LA BANDA M1 (662 - 698 MHz) Channel GRP 1 GRP 2 GRP 3 GRP 4 GRP 5...
MASTER LIST The “Master List” is a comprehensive index of all system frequencies offered in the 662–698 MHz band, in 25 kHz increments. To enter or exit the Master List, press and hold the SET button on either the transmitter or receiver for approximately 10 seconds. LISTE PRINCIPALE «...