Get Started - Scientific Atlanta Explorer 8000 DVR User Manual

Get Started

Getting started is easy. After unpacking your DVR equipment, follow these steps
to set up your DVR.
1. Determine the types of connections you need to make, based on your TV
type (HDTV or SDTV) and home theater connection requirements.
2. Connect the DVR to your TV based on the connection information described
in "Connect the Explorer DVR to Your TV" on page 4.
Note: Your cable service provider may have already installed and connected
the DVR for you. If not, follow the instructions on page 4 to make the
appropriate connections.
3. Prepare the remote control as described in "Prepare the Remote Control to
Work With Your TV and DVR" on page 5.
4. Configure the picture display for your TV using the Setup Wizard. See
"Prepare the Explorer DVR to Work With Your TV" on page 6.
Get Started
3