Casio VZ-8M Operation Manual page 62

17
Parameters
TOTAL = ON/OFF
17 TOTflL UIBRflTO
TOTflL=OFF
The TOTAL VIBRATO function is a toggle switch which
can be used to turn the TOTAL VIBRATO function ON
or OFF, and contains parameters related to total-vibrato
control.
When this function is turned OFF, patches are affected by
the data programmed individually in VOICE-07 (VIBRA
TO function). When set to ON, COMBI sounds are af
fected globally — regardless of independent VOICE-07
settings.
There are five basic parameters within this function —
WAVE, DEPTH, RATE, DELAY and MULTI. These
correspond to the parameters in VOICE-07 (VIBRATO
function). For details on operations, see page 32.
Note that when an 8-patch MIX is selected with the KEY
ASSIGN function, the TOTAL parameter is automatical
ly turned ON.
TOTAL VIBRATO
O/S
Mode
K
W
17 TOTflL UIBRflTO
• MULTI=ON
A
If the parameters in this function are accessed when a KEY
ASSIGN configuration has been selected which contains
only keyboard split points — without any "layered"
patches, the display appears as in FIG-D.
If you want to use the TOTAL VIBRATO function when
this display appears, you must first exit this function
(TOTAL VIBRATO) by pressing the COMBINATION key
or the EDIT key. Next, choose a KEY ASSIGN configu
ration which contains layered patches (" 1 + 2", for exam
ple) by pressing the VALUE key.v
EDIT—PAGE—CURSOR—VALUE
Domain
Combination
Normal
4 mix/split
PATCH(Layered); GLOBAL
PATCH(Layered); GLOBAL
PATCH(Uyered)i GLOBAL
17 TOTflL UIBRflTO
TOTflL=ON CHECK KEYflSSIGN!
Related Functions
VOICE-07
Multi
8 mix channel
17 TOTflL UIBRflTO