Casio VZ-8M Operation Manual page 142

3. Single Operation Data
Operation Data for a single operation memory consists of 100 bytes of data common with the VZ-l/lOM, and 75
bytes which is unique to the VZ-8M.
As shown on page 2, data for COMBI operation memories and NORMAL operations memories is transmitted as
follows;
03 | 00 | 7N
FO 44
followed by
F0 44 03 02
MULTI CH operation memory data is transmitted as follows;
44 | 03 | 02
F0
Note that the arrangement of operation memory data differs for COMBI, NORMAL and MULTI CH modes.
3-1-1. COMBI Operation Data (VZ-1 format)
Data common with the VZ-1/10M is composed of 100 bytes of data and is transmitted in the following order.
Byte No.
MODE, ASSIGN
OPERATION NAME
15 POS X-FADE (EFFECT) (EFFECT-15)
-24-
I I | 1 1 OP data (VZ-1) | C s|
100 Bytes -
1 OP data (VZ-8M)
75 Bytes-
0 1 1 OP data
■175 Bytes-
DATA
] 1(H): COMBI 1 + 2
J
-MODE & ASSIGN 8(h): COMBI 1/2/3/4
For 1(H) through 8(h), byte no. 0 of VZ-8M for
mat (page 28) is the same as the last 4 bits of
MODE, ASSIGN data. However, when 9(H) is
selected (8-voice mix), 0(h) is set for this value.
1st character
2nd character
12th character
VZ-8M code
-OPERATION NAME (ASCII CODE)
' TOTAL VIB 0: OFF, 1: ON
- X-FADE 0: OFF, 1: ON
- TOTAL TREM 0: OFF, 1: ON
F7
CS |
F7
CS | 1
F7
I