Fujitsu SERVIS IP-KVM User Manual page 30

2.2 Set the IP Address (For Initial Installation)
13. Specify the default gateway. Enter "g" in the "Choice:" prompt.
2
14. Current default gateway is displayed in square bracket. Enter the new IP
address of default gateway and press the [Enter] key.
15. The "Choice:" prompt is displayed again. Enter "w" to save the new setting.
16. The following is displayed and the setting is changed.
17. Press the [Enter] key again after the setting and display the "Choice:" prompt.
Enter "q" to log off. The "login:" prompt is displayed after the log off.
Then the network setting is changed as following value.
This is the operation method to change network initial settings.
SERVIS IP-KVM
18
1p Converter
User's Guide
Choice: g Enter↵
Default gateway (or 0.0.0.0 for none) [0.0.0.0]: 192.168.0.1
Choice: w
Enter↵
Writing... Done.
Applying settings...
eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation complete.
eth0: IBM EMAC: MAC 00:0e:00:ee:04:03.
eth0: IBM EMAC: open completed
SNMP agent started.
Redir Server started (br0/eth0=80, eth1=0).
rhub: No such file or directory
VNC Server: Version V1L20ES
Done.
Changes commited.
Press Enter to continue...
Choice: q
Enter↵
login:
IP address:
Subnet mask:
Default gateway:
192.168.0.100
255.255.255.0
192.168.0.1
Enter↵