Procedure For Tilting Up (Manual Tilt Models) - Yamaha E25B Owner's Manual

the engine will be tilted for more than a
few minutes. Otherwise fuel may leak.
ECM00241
CAUTION:
Before tilting the outboard motor, stop
G
the engine by following the procedure
on page 32. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
Do not tilt up the engine by pushing the
G
tiller handle (if equipped) because this
could break the handle.
EMU27979
Procedure for tilting up (manual tilt
models)
1. Place the remote control lever / gear
shift lever in neutral.
N
2. Place the tilt lock lever (if equipped) in
the release/up position.
N
ZMU02978
ZMU03087
3. Pull up the shallow water lever (if
equipped).
4. Hold the rear of the top cowling with one
hand and tilt the engine up fully.
5. Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
the lock position automatically.
ECM01640
CAUTION:
Do not use the tilt support lever or knob
Operation
ZMU02979
ZMU02917
ZMU02980
36