EnGenius ESR6670 User Manual page 61

Add Port Triggering
Fill in the "Trigger Port", "Trigger Type", "Public Port", "Public Type", "Public
Port" and "Description" of the setting to be added and then Click <Add>. The Port
Triggering setting will be added into the "Current Trigger-Port Table" below. If you
happen to make a mistake, just click <Reset> and the fields will be cleared.
Remove Port Triggering
If you want to remove Special Application settings from the "Current Trigger-Port
Table", select the Port Triggering settings you want to remove in the table and then
click <Delete Selected>. If you want remove all Port Triggering settings from the table,
just click the <Delete All> button. Click <Reset> will clear your current selections.
- Application Layer Gateway (ALG)
You can select applications that need ALG support. The router will let the selected application
to correctly pass through the NAT gateway.
selection. Once you have selected an application, select a location
(1-5) in the "Add" selection box and then click the <Add> button.
This will automatically list the Public Ports required for this popular
application in the location (1-5) you specified.
58