Noise Occurs, But Nothing Prints; Noise When Product Sits For A While; Product Icon Does Not Appear In Windows Taskbar - Epson WorkForce Pro WP-4010 User Manual

Parent topic:
Related tasks
Running a Printer Check

Noise Occurs, But Nothing Prints

If your product makes a printing noise, but nothing prints, try these solutions:
• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if
necessary.
• Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that
extends beyond the base of the product in all directions.
Parent topic:

Noise When Product Sits for a While

Your product is performing routine maintenance. This is normal.
Parent topic:

Product Icon Does Not Appear in Windows Taskbar

If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that does
not work, try this solution:
1. Do one of the following:
• Windows 7: Click
• Windows Vista: Click
• Windows XP: Click Start and select Printers and Faxes. (Or open the Control Panel, select
Printers and Other Hardware if necessary, and Printers and Faxes.)
2. Right-click your product name, select Printing Preferences, and select your product name again if
necessary.
3. Click the Maintenance tab.
4. Click the Extended Settings button.
5. Select Enable EPSON Status Monitor 3, then click OK.
6. Click the Monitoring Preferences button.
7. Click the Shortcut Icon box.
Solving Problems Printing from a Computer
Solving Problems Printing from a Computer
Solving Problems Printing from a Computer
and select Devices and Printers.
, select Control Panel, and click Printer under Hardware and Sound.
126