Notes On Projector Placement And Operation; Direction Of Air Intake And Exhaust; Operating The Projector Continuously - Panasonic PT-F100NT Spec File

S F
P E C I L
LCD Projector

Notes on Projector Placement and Operation:

The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector's
exhaust openings.
3. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the
projector is between 0°C/32°F and 35°C/95°F. Also make sure the projector's intake and exhaust
openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is
not sucked into the intake openings.
200 mm (7-7/8˝) or more

Direction of Air Intake and Exhaust

Operating the Projector Continuously

1. If the projector is to be operated continuously 10 hours or more, lamp replacement cycle duration
becomes shorter.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to
export control regulations. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. Intel and Pentium are registered trademarks of
Intel Corporation. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries. All other trademarks are the property of their respective trademark owners.
As of May 2007
E
500 mm (7-5/8˝) or more
PT-F100NT
500 mm (7-5/8˝) or more
Intake
Exhaust
< 11 >