Removing The Monitor Pedestal Base - HP 2310t User Manual

Removing the Monitor Pedestal Base

You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm,
or other mounting fixture (purchased separately).
CAUTION:
power and signal cables are both disconnected. Also disconnect the USB and audio cables if they are
connected to the monitor.
1. Disconnect and remove all cables from the back of the monitor.
2. Lay the monitor face down on a flat surface covered by a dry, clean cloth.
3. Pry back the top of the VESA cover plate (1) then slide it up (2) to remove it from the back of the
monitor.
Figure 3-12
12 Chapter 3 Setting Up the Monitor
Before beginning to disassemble the monitor, be sure the monitor is turned off and the
Removing the VESA Cover Plate
ENWW