AFETY RECAUTIONS Do not drop, puncture, or disassemble the camera. Never tug on the power adapter. Use the plug to remove it from the wall. Use the device with care. Avoid pressing hard on the camera or receiver body. ...
Congratulations on purchasing your First Alert Security Camera product. First Alert has been helping families and businesses stay safe for over 50 years. By having a First Alert Security Camera, you’re taking the first step in protecting your home or business from damage or theft.
Getting to Know Your DW-700/702 Security System Model DW-700/702 User's Manual IGITAL IRELESS AMERA Antenna Power LED Camera Lens Link LED IR LED Camera Stand Pairing Key 10 Power Jack 11 Microphone 12 Power Supply...
Back in Menu mode; MENU Enter/exit Menu mode in View mode Record in Menu mode; Start/stop recording View mode Power IR Sensor Speakers SD Card Slot AV Out Jack DC In Jack Getting to Know Your DW-700/702 Security System Model DW-700/702 User's Manual...
Getting to Know Your DW-700/702 Security System Model DW-700/702 User's Manual EMOTE ONTROL Start/Stop manual recording (SD card must be installed) Enter Event List directly; Press button to play/pause the video files Press to delete video files you selected In view mode, display up to four images cameras at one...
NSTALLING THE AMERA Select the position for the camera and secure the camera stand. Screws and anchors are supplied. Use an appropriate screw type for the mounting surface. Screw the camera onto the bracket. Setting Up Your DW-700/702 Security System...
Connect the AV cable into the AV OUT of the receiver. Connect the two RCA jacks to the TV AV IN. Yellow = Video; White = Audio Press POWER button to turn on the receiver. Model DW-700/702 User's Manual Operating Menus...
This chapter provides information about the menu screens. The screens are used to control the various functions of the DVR system. The user selects options from a series of menus and executes the actions by using the keypad on the IR controller. PERATION The Main Menu display when the system is powered up.
ON/OFF. Make sure unavailable cameras are set OFF from SCAN or QUAD mode. AMERA RIGHTNESS 1. Use to select a camera. 2. Press to display Camera Brightness bar. 3. Use to adjust Brightness. Model DW-700/702 User's Manual Operating Menus...
AIRING 1. Use to select a camera. 2. Press to start system countdown from 60 seconds. 3. Within 60-second countdown, press LINK on the camera cable. Image will display when pairing is complete. ESOLUTION 1. Use to select Resolution between 640x480 and 320x240. 2.
Alarm Period for motion detection: OFF, 5 sec, 10 sec, 15 sec. (Default setting is 5 sec.) 2. Press to confirm. Press any button to mute when motion detection alarm is activated. Operating Menus Model DW-700/702 User's Manual Alarm Period Motion Detection SD Card Overwrite...
OTION ETECTION ECORD 1. Use to select a different Motion Detection Record Period: OFF, 5 sec, 10 sec, 15 sec. (Default setting is 5 sec.) 2. Press to confirm. Motion detection will be disabled for 5 seconds after motion detection recording or alarm stops.
SD card, set the power saving and TV format parameters, reset the system to factory default settings, and check system information. to Play/Pause file. to adjust volume down; press ESC to icon. Operating Menus Model DW-700/702 User's Manual...
ISPLAY 1. Use to select Quad display ON/OFF. 2. Press to confirm the change. 3. Turn all available channels ON before changing to Quad mode. 4. To exit the Quad display, press directional keys to enter single channel: = CAM1; = CAM2;...
1. Press to select SD Card Format screen. Start 2. Press and press Make sure SD card is unlocked. For first time use, it is strongly recommended to format the SD card. to format card. Operating Menus Model DW-700/702 User's Manual...
OWER AVING 1. Use to turn Power Saving mode ON/OFF. (Default setting is ON.) When Power Saving mode is ON, the monitor screens turns off after a 2-minute idle time. Speaker volume remains on. 2. Press any key to activate monitor screen from Power Saving mode. TV F ORMAT 1.
2. Press and press YSTEM ERSION ---- Cam1 ---- Cam2 ---- Cam3 ---- Cam4 ---- 1. Press to select System Version screen. For factory use only. to reset the system to factory default settings. Operating Menus Model DW-700/702 User's Manual...
Problem Possible Causes No power supply to System message camera shows “No Signal” Channel is not linked up to camera Service out of range Signal is blocked Antenna direction is Low or unstable limited signal Signal has been blocked Strong radio signal nearby Strong electromagnetic interference nearby...
Page 24
Interference Poor image quality Technical Information Model DW-700/702 User's Manual The camera has a high sensitivity microphone. Keep the camera at least 10 feet away from the receiver. If the camera must be within 10 feet of the receiver, keep the volume down.
ENERAL Operating Power Operating Temperature Indoor / Outdoor Dimensions Camera & Stand Receiver Remote Control 4 Camera Multi-View AMERA Image Sensor Viewing Angle Audio Range Digital Color Motion Detection Night Vision Capability Number of Infrared LEDs Night Vision Distance IRELESS Wireless Range Frequency Transmission Channels...
IMITED ARRANTY BRK Brands, Inc., (“BRK”) the maker of First Alert® brand products warrants that for a period of one year from the date of purchase (the “Warranty Period”), this product will be free from defects in material and workmanship. BRK, at its sole option, will repair or replace this product or any component of the product found to be defective during the Warranty Period.
Warranty Model DW-700/702 User's Manual software via its website. This warranty does not cover any alteration or damage to any other software that may be or may become resident on the users system as a result of installing the software provided. This warranty is in lieu of other warranties, expressed or implied, and BRK neither assumes nor authorizes any person to assume for it any other obligation or liability in connection with the sale or service of the product.