Switching Audio Control Modes - Eclipse CD8051 Owner's Manual

Basic operation
[E-COM] button
[AUDIO CONTROL]
button

Switching audio control modes

Various audio control modes may be fine-tuned using this
procedure.
1. Press the [AUDIO CONTROL] button for less than
2. Turn the [AUDIO CONTROL] button to the left or
•When Tone Control feature is off, adjustment of BASS,
MID, and TREB will be skipped.
•When an optional DSP/EQ unit is connected, the mode
switches from Volume
adjustment. BASS, MID, TREB, FADER, BAL, may be
skipped, and it depends on the type of DSP/EQ and its
situation.
•Adjustment of BASS, MID, and TREB is set by each mode
such as CD, tuner.
28
Buttons [1] to [5]
one second to select the item to be adjusted.
Each additional tap of the button switches in the order
of VOL, DSP* 1 , BASS (low frequencies), MID (middle
frequencies), TREB (high frequencies), CENTER*
REAR* 2 , FAD (front-rear speaker balance), BAL (left-
right speaker balance), and SUB-W (subwoofer level).
1
* This is displayed only if DSP/EQ is connected.
2
* This is displayed only if Digital Sound Processor is
connected.
right
It controls levels and adjust the sound to your
preference.
[OPEN] button
DSP level adjustment
2 ,
EQ level