Table of Contents
Advertisement
Using for the first time
Before using the machine for the first time, wash all the acces-
sories in warm soapy water and rinse. For the best tasting coffee
the internal circuits mut be flushed through at least twice. To do
this, follow the instructions in the paragraph "How to prepare the
filter coffee" without using ground coffee.
Installation
• After removing the packaging, make sure the product is com-
plete.
• If in doubt, do not use the appliance and seek the Customer
Service authorised by the manufacturer.
• The packing elements (plastic bags, polystyrene foam, etc.)
should be kept out of reach of children as they are a safety haz-
ard.
• Place the appliance on a work surface far away from water taps,
basins and sources of heat.
• After positioning the appliance on the work top, leave a space
of at least 5 cm between the surfaces of the appliance and the
side and rear walls and at least 20 cm above the coffee maker.
• Never install the appliance in environments where the tempera-
ture may reach 0°C or lower (the appliance may be damaged if
the water freezes).
• Make sure the mains voltage corresponds to the voltage indicat-
ed on the appliance rating plate.
Connect the appliance to an efficiently earthed socket with a
minimum current rating of 10A only.
The manufacturer may not be considered liable for possible
incidents caused by the failure to adequately earth the mains.
• If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified pro-
fessional.
5
Filter Coffee Maker
Hide quick links:
Advertisement
Table of Contents
