Yamaha RX-A1020 Owner's Manual page 87

❑ Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
■
Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.56).
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.56).
Settings
Off (Off) Disables Compressed Music Enhancer.
On (On) Enables Compressed Music Enhancer.
Default
TUNER, USB, (network sources): On (On)
Others: Off (Off)
• Compressed Music Enhancer does not work on signals whose sampling rate is over 48 kHz.
■
Video Mode (Video Mode)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in "Processing" (p.105) in the "Setup" menu.
Settings
Processing
Enables the video signal processing.
(Processing)
Direct (Direct)
Disables the video signal processing.
(default)
■
Audio Select (Audio Select)
Selects the audio input jack to use when more than one audio connection is made for
one input source.
• This setting is applied separately to each input source.
Settings
Auto (Auto) (default)
HDMI (HDMI)
Coax/Opt
(Coax/Opt)
Analog (Analog)
■
Audio Mode (Audio Mode)
(U.S.A. model only)
Switches between stereo and monaural for FM/AM radio reception.
• This setting is applied separately to each band (FM/AM).
Settings
Auto (Auto) (default)
Mono (Mono)
• HD Radio programs are not available when the unit is in the monaural reception mode.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
Automatically selects the audio input jack in the following priority order.
1. HDMI input
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
Always selects HDMI input. No sounds are produced when no signals
are input through the HDMI jack.
Always selects digital input (COAXIAL or OPTICAL). No sounds are
produced when no signals are input through the COAXIAL or
OPTICAL jack.
Always selects analog input (AUDIO). No sounds are produced when
no signals are input through the AUDIO jacks.
Receives the selected band (FM or AM) in stereo sounds when the
signal reception is good and in monaural sounds when it is not good.
Receives the selected band (FM or AM) in monaural sounds.
87
En