Chapter 3 Software Installation - PNY Quadro4 XGL Series User Manual

Chapter 3
Software Installation
Did you Uninstall your existing VGA driver?
If Yes, proceed with Chapter 3.
•
If No, go back to Chapter 1 'Uninstalling Your VGA Driver', complete the process and then
•
continue with Chapter 3.
Installing the Standard Graphics Adapter (VGA) Driver.
Power up you computer and launch Windows®, 2000, XP or NT.
•
The Building Driver Database dialog box will appear as the Windows® operating system builds the
•
database.
When the Add New Hardware Wizard appears, click Next.
•
Choose Search For The Best Driver For Your Device, and click Next.
•
Make sure that all of the four choices are left blank. If not, un-check the applicable box. Then click
•
Next.
Windows® is now ready to install the Standard Graphics Adapter driver. Click Next to continue.
•
Click Finish. Windows® will install the Standard Graphics Adapter driver.
•
You will now be prompted to re-start your computer. Click Yes.
•
Installing Quadro Graphics Drivers
1. Insert the PNY Quadro CD-ROM into the CD-ROM drive.
2. For Windows®, 2000/XP go to PNY CD-ROM directory: Drivers /WIN 2K-XP double click on the
Set-up Icon and follow the screen instructions.
3. For Windows® NT go to PNY CD-ROM directory: Drivers /WIN NT4 double click on the Set-up
Icon and follow the screen instructions.
4. For Windows®, 2000 DirectX Drivers go to PNY CD-ROM directory: Drivers/DirectX8.1/Win2K
double click on the DXGINTENG.EXE and follow the screen instructions.
PNY Quadro User Manual page 12