Keys And Remote Controls; Using The Key; Generalinformationon Radio Frequencies; Programming The Remote Control - Ford Galaxy Owner's Handbook Manual

USING THE KEY

Remote control with flip key
blade
E74382
GENERALINFORMATIONON
RADIO FREQUENCIES
CAUTION
The radio frequency used by your
remote control can also be used by
other short distance radio
transmissions (e.g. amateur radios,
medical equipment, wireless headphones,
remote controls and alarm systems). If
the frequencies are jammed, you will not
be able to use your remote control. You
can lock and unlock the doors with the
key.
Note: You could unlock the doors if you
press the buttons on the remote control
unintentionally.
The operating range between your
remote control and your vehicle varies
depending on the environment.
PROGRAMMING THE
REMOTE CONTROL
You can programme a maximum of eight
remote controls to use with your vehicle
(including any supplied with your vehicle).

Keys and remote controls

Programming a new remote
control
1. Insert the key in the ignition.
2. Cycle the key from position 0 to II and
then back to 0 four times in quick
succession (about once a second).
3. Remove the key from the ignition and
press any button on the remote
control.
4. Reinsert the key and turn to position
II then 0. Remove the key and test
the remote control to confirm
programming has been successful.
Reprogramming the unlocking
function
Note: When you press the unlock button
either all the doors are unlocked or only
the driver's door is unlocked. Pressing the
unlock button again unlocks all the doors.
Press and hold the unlock and lock
buttons on the remote key simultaneously
for at least four seconds with the ignition
off. The direction indicators will flash twice
to confirm the change.
To return to the original unlocking function,
repeat the process.
31