Starting A Petrol Engine - Flexible Fuel - Ford Galaxy Owner's Handbook Manual

Cold or hot engine
All vehicles
CAUTION
When the temperature is below
-20ºC (-4ºF), switch the ignition on
for at least one second before
starting the engine. This will make sure
that the maximum fuel pressure is
established for starting the engine.
Vehicles with manual transmission
Note: Do not touch the accelerator
pedal.
1. Fully depress the clutch pedal.
2. Start the engine.
Vehicles with automatic
transmission
Note: Do not touch the accelerator
pedal.
1. Select park or neutral.
2. Fully depress the brake pedal.
3. Start the engine.
All vehicles
If the engine does not start within 15
seconds, wait for a short period and try
again.
If the engine does not start after three
attempts, wait 10 seconds and follow the
Flooded engine procedure.
If you have difficulty starting the engine
when the temperature is below -25ºC
(-13ºF), press the accelerator pedal
between ¼ to ½ of its travel and try again.
Flooded engine
Vehicles with manual transmission
1. Fully depress the clutch pedal.
Starting the engine
135
2. Fully depress the accelerator pedal
and hold it there.
3. Start the engine.
Vehicles with automatic
transmission
1. Select park or neutral.
2. Fully depress the accelerator pedal
and hold it there.
3. Fully depress the brake pedal.
4. Start the engine.
All vehicles
If the engine does not start, repeat the
Cold or hot engine procedure.
Engine idle speed after starting
The speed at which the engine idles
immediately after starting will vary
depending on the engine temperature.
If the engine is cold then the idle speed
will automatically be increased in order to
heat the catalytic converter as quickly as
possible. This ensures that vehicle
emissions are kept to an absolute
minimum.
The idle speed will slowly decrease to the
normal level as the catalytic converter
warms up.
STARTING A PETROL
ENGINE - FLEXIBLE FUEL
For general information on starting a
petrol engine. See Starting a petrol
engine (page 134).