Remington PG6060 Manual page 6

ENGLISH
, Trimming body hair
• Attach Body Hair trimmer attachment head.
• To achieve the desired hair length, change the guide comb by easily sliding it onto one
of the three slots on the attachment head. The different slots represent 2.8mm, 5.6mm
& 9.6mm hair lengths
• Place the flat top of the trimmer comb against the skin.
S lowly slide the trimmer through the hair, in the direction of hair growth.
• Use slow and well-controlled movements.
• If hair builds up in the guide comb during the trimming process, switch the unit off, pull
off the guide comb. Brush trimmer / rinse comb.
, Removing body hair
To remove the hairs completely,
• Trim the hair down to 1.2 mm without attaching the guide comb and then change to the
Mini Screen attachment head.
• Hold the shaving head to your skin.
• Stretch your skin with your free hand so hairs stand upright.
• Only apply light pressure on the shaving head whilst shaving.
• Shave against hair growth.
C CARE FOR YOUR GROOMER
Care for your product to ensure a long lasting performance. We recommend that you clean your
groomer after each use.
The easiest and the most hygienic way to clean the groomer is by rinsing the product head after
use with warm water.
E After each use
• Rinse the accumulated hair from the cutters and shake off excess water. Alternatively,
use a brush.
• Gently tap on a flat surface to remove hair particles, and brush the remaining hairs away.
• Place one or two drops of cutter oil or sewing machine oil on the blades. Turn the clipper
on to distribute the oil evenly, wipe off any excess oil.
• Wipe the main unit with a damp cloth and dry immediately.
Note: Ensure that the groomer is turned off when applying the oil or rinsing under the
tap.
6
PG6060-INT-T22- SS2013 amended.indd 6 11/21/2012 2:09:02 PM