Hardware Installation - TRENDnet TK-401R User Manual

Hardware Installation

Before installation, please make sure all of peripherals and
computers have been turned off.
1.Install the Switch in a fairly cool and dry place; see the
Technical Specifications section for the acceptable operating
temperature and humidity ranges. The installation site must be
free from strong electromagnetic field generators,
vibration, dust, and direct exposure to sunlight. Install
the Switch on a sturdy, level surface that can support its weight,
or in a standard EIA 19" equipment rack. To mount the Switch on
the rack, install the included mounting brackets to the sides of
the Switch, secure them with the screws, and then mount the
Switch to the rack with the hardware provided by the rack
manufacturer.
2.Connect the Keyboard, VGA, Mouse cables to the console
ports of KVM switch
3.Connect the Keyboard, VGA monitor, and Mouse to the
computer port of KVM switch
4.In some cases, KVM switch gets the power from computer port
by PC's Keyboard or Mouse port. However, we recommend using
the AC Adapter as the power source.
5.After Powering on computers and finishing the boot-up process,
you can start operating the KVM switch.
Note:
Please don't switch the PC port (i.e. Don't press the push
button of KVM switch or run "Hot-Key") when the computers
are booting up.
~6~