Usb Charger - Asus ESC500 G3 User Manual

6.3.10

USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode or hibernate mode.
The USB Charger+ will not work if the ErP-ready item in the BIOS is enabled.
Launching USB Charger+
To launch USB Charger+, click
on the AI Suite 3 main menu bar.
USB Charger+ screen
Indicates that
the connected
USB device
is in charging
mode
Click to select
the type of
USB device
that you wish
to charge
when the
system is off
Ensure to connect your USB device into the USB port that supports this utility. Refer to
section 3.5.2 Rear panel connections of your user manual for more details.
6-20
on the top edge of the screen, then click USB Charger+
Click to apply Click to discard
the settings the settings
Click to
detect the
connected
USB device
Click to fast-
charge your
USB device
Click to stop
charging
your USB
device
Chapter 6: Driver installation