Remote Control; Cellphone Pairing Mode; Bluetooth Connection And Disconnection; Last Number Dialing - Boss Audio Systems BV9565BI User Manual

08
Bluetooth

Cellphone Pairing Mode

1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cell phones have different blue-
tooth menus, please refer to your phone
manual.)
3. When CAR A/V DEVICE appears, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
5. Press the connect with the Handsfree
option on your cellphone, CONNECT
appears.
Bluetooth Connection and
Disconnection
When you established a bluetooth connection
between this unit and the cellphone, the blue-
tooth icon on the display appears in red.
Press 29 PAIR to turn off bluetooth connec-
tion, and appears in blue.
Press , PAIR SUCCESS will appear on
29
the display. When the bluetooth is connected,
the display will show CONNECT. When the
Bluetooth is disconnected, the display will
show PAIRING TIME OUT.
Note:
* Make sure the phone battery has good power.
If not, the connection quality may be affected.
* To ensure connection succeed
----Please selete menus of cellphone with bluetooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone manually.
For example: pairing fixture cellphone
40
* Pressing in the monitor also performs the
5
same function.
* Press in the monitor to turn off the
7
bluetooth function.
Using the Unit as a Handsfree
Device
When the unit is ringing, the display will
show CALL FROM and the phone number
********** .
To accept call: Press to answer a call,
30
the display will show PICK UP.
To reject call: Press 31 to reject a call,
the display will show REJECT .
To end call: Press to end call,
the display will show HANG UP
Note:
* Some of cellphones do not support reject
call during bluetooth mode.
* Pressing and in the monitor also
performs the same function.

Last Number Dialing

Press 30 button, last call number will
apear, press again, and then REDIAL
OK appears on the display during
conversation.
Note:
* Pressing in the monitor also performs
the same function.

To Dial by Cellphone

1. When you make a call by cell phone, the
unit will automatically be activated. DIAL
OK will appear on the display.
2. When you receive a call, PICK UP appears
on the display.
connect.
Before You Start

Remote Control

.
Tips:
For more information on replacing battery, please refer to Replacing the Battery
on page 6.
26 25
1
2
3
4
5
20
6
7
8
9
10
11
13
12
28
29 30
01
24
23
22
27
21
19
18
17
16
15
14
31
9