Erase All - Agilent Technologies MXG (Series A and B) Manual

Memory Clearing, Sanitization and Removal Procedures

Erase All

Erase All

This function removes all user files, user flatness calibrations, user I/Q calibrations, and resets all table
editors with original factory values, ensuring that user data and configurations are not accessible or
viewable. The instrument appears as if it is in its original factory state, however, the memory is not sanitized.
This action is relatively quick, typically taking less than one minute (the exact time depends on the number of
files).
Model Key Sequence
MXG (Series A/B) File > More > Security > Erase All > Confirm Erase
EXG
PSG Utility > Memory Catalog > More > Security > Erase All > Confirm Erase
ESG
Note that there is a similar but distinct function, as described below, that deletes all user files but does not
reset the table editors:
Model Key Sequence
MXG (Series A/B) File > Delete All Files
EXG
PSG Utility > Memory Catalog > More > Delete All Files
ESG
30