Table of Contents
Advertisement
Maintenance
Prior to undertaking any maintenance operation,
be sure to unplug the appliance.
Defrosting of the freezer
The inner walls of the freezer become gradually
covered with a layer of frost keeping in mind not to
open the door frequently and keeping the food wrap-
ped up in closed bags.
Whenever the thickness of ice reaches 5 mm. the
frost should be removed. Here to proceed as follows:
1... Remove all food staffand place it in the coolest
possible place.
2... Never pull up the sticked ice, you must wait untill
it is melted, when the ice is soft you can remove
it by helping yourself with a plastic ice-scraper,
never use sharp objects, or heating households
because the appliance could be seriusly dama-
ged.
3... Once removed the ice clean and dry the inside
with a soft piece of cloth.
4... You can plug it in again.
Defrosting of the refrigerator
Frost is automatically eliminated in the refrigerator.
Clean regularly the water drain opening «G».
16
Cleaning
• Do not use alcohol or any cleanig product contai-
ning alcohol because it can damage the cabinet.
• Use lukewarm water and neutral soap or bicarbo-
nate of soda for cleaning the interior and the exte-
rior of the appliance. Never use detergents nor
abrasive powders.
• Clean the black grill on the read of the appliance
(condeser), motor and the upper and downer venti-
lation slots with a brush or vacuum cleaner. This
way the performance of the appliance will improve
and energy consumption reduced.
• Clean the water container above the motor.
• Extract the base pulling it outwards in order to per-
mit its cleaning.
Idle periods
During periods when the appliance is not in use take
the following precautions:
• Unplug the appliance.
• Remove all the food.
• Defrost and clean the interior and all accessories.
• Leave the door ajar to permit the air to circulate in
the interior and thus avoid unpleasant smells.
Advertisement
Table of Contents
