Something Not Working; Instructions For The Installer; Engineer Technical Data - Zanussi ZGG 649 Instruction Booklet

Something Not Working?

If the appliance is not working correctly, please carry out the following checks before contacting your
local
Service Centre.
SYMPTOM
# There is no spark when lighting the gas
# The gas ring burns unevenly
If after all these checks, your appliance still
does not operate correctly, contact your local
Service Centre.

Instructions for the Installer

Engineer technical data

OVERALL DIMENSIONS
Width: 580 mm.
Depth: 510 mm.
Height: 88 mm.
Weight: 9,8 Kg.
CUT OUT DIMENSIONS
Width: 550 mm.
Depth: 470 mm.
Thickness: 40 mm.
Burner
Auxiliary (dia. 42 mm.)
Semi-rapid (dia. 57 mm.)
Rapid (dia. 90 mm.)
Nominal Power LPG (Butane "A")
kW kCal/h Nozzle
0,95 814 50
1,60 1368 066
2,45 2095 77
6
SOLUTION
$ Check that the unit is plugged in and the
electrical supply is switched on
$ Check that the RCCB has not tripped (if
fitted)
$ Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
$ Check the main jet is not blocked and the
burner crown is clear of food particles.
$ Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
Supply Connections
Gas:
RC 1/2 inch (1/2 inch male) Rear right hand
corner
Electric:
230-V 50Hz supply, 3 core flexible cable with
non rewireable plug.
Appliance Gas supply: LPG 30 mbar
Appliance Class: 3
Appliance category: I 3
Diameter
Tap. By-Pass Tap colour Pressure
gh
75 28
126 35
193 45
(*) 1 mbar = 10 mm. water coloumn.
Feeding
mbar (*)
Red/Yellow
Brown/Black 30
Blue/Yellow