Av In Operation - Boss BV7334 User Manual

OPERATION
◆ A
utomatic memory storing &
program scanning
1) Program scanning
Shortly press
remote control to scan preset
station.
2) Automatic memory storing
Press and hold press AMS button
on the remote control or BND/AMS
button on the front panel for about
several seconds, the radio searches
from the current frequency and
checks the signal strength until one
cycle search is finished. And then
stations are stored into the preset
number button in turn according to
the strength of the stations. When
auto search is finished, it will enter
into preset
automatically.
Note: Press and hold 1-6 numeric
buttons on the remote control for
about several seconds, will store
the current station to the current
numeric key position.
◆ Mono/Stereo
Press ST button on remote control to
select mono or stereo mode. You can
sometimes improve reception of
distant stations by selecting mono
operation.
◆
RBDS OPERATION
In FM mode, press TA button on the
front panel of the unit, the unit will
search Traffic
automatically.
Traffic Announcement station, the
unit will change to the Traffic
Announcement station automatically.
Press TA button again will exit TA
mode.
button on
AMS
scan mode
Announcement
When received
USE PTY BUTTON
Press PTY button will enter PTY
SELECT MENU. In the menu, use
VOL+/- buttons on the remote
control or volume knob on the front
panel to change the items.
When PTY is selected, the radio
starts to search corresponding PTY
information,
corresponding PTY information is
detected.
If corresponding PTY information is
not existed
engaging is automatically exit to
normal mode.
Notes:
TA: Traffic Announcement
Identification
Identification data showing traffic
information is being transmitted
or not
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
◆
Switching Area USA/EUR
In radio mode, press and hold the
volume button on the front panel of
the unit or SELECT button on the
remote control, then you can use the
volume knob on the unit or VOL+/-
buttons on the remote control to set
AREA USA or AREA EUR frequency
spacing.

AV IN OPERATION

a On the front panel of the unit, there is an
AV IN jack. When you connected the
audio/video device from the jack, press
MODE button on the remote control or
MODE on the front panel to select AV IN
mode.
23
and stops if the
any more, PTY