Table of Contents
Advertisement
Important information regarding
installation
Hot air emitted by the appliance may reach
temperatures of up to 60°C. Therefore, do not
place appliance on floors which are not resistant to
high temperatures.
Make sure that the temperature of the room in
which the appliance is installed does not exceed
35°C. Excessive room temperature will prolong
drying times and cause energy consumption to
increase.
Please keep space surrounding tumble dryer as
clean as possible.
Do not remove the appliance's adjustable feet. It is
essential to provide a certain amount of space
between the floor and the appliance for ventilation
purposes. Blocking ventilation would inevitably
cause the appliance's inside temperature to
increase and would therefore affect the appliance's
efficiency.
Electrical connections
The tumble dryer comes with cable and plug for 230V
single phase 16 A connections. Permanent installation
of the appliance in humid environments, such as
bathrooms, must be carried out in full compliance
with the relevant laws and regulations. Permanent
electrical connections must be carried out by qualified
personnel only.
Stacking Kit (optional accessory)
This tumble dryer may be stacked on a front-loading
washing machine. However, the tumble dryer will
have to be fixed to the washing machine. For this to
be carried out, the special stacking kit (available from
all Zanussi Authorised Dealers) will be required.
Connection of a drain hose
If there is a drainage point where the appliance has to
be installed, condensation can be diverted also by
means of a drain hose available on the market.
To connect the drain hose to the back of the appliance
proceed as follows:
remove hose clamp A;
remove cap B from the appliance;
insert drain hose C;
fix drain hose C with clamp A.
62
P1044
A
A
B
C
P1043
B
Hide quick links:
Advertisement
Table of Contents
