Wireless Lan Function Settings; Status Indication; Connecting To A Wireless Lan Access Point That You Select (Select Ap) - Roland HP504 Owner's Manual

Convenient Functions

Wireless LAN Function Settings

You can view or edit the wireless settings.
Basic Operation
1.
While holding down the [Song Balance] button, press the
[AB Repeat] button .
2.
Press the [ ] [ ] (Slow/Fast) buttons to select the
"Wireless," then press the [Song] button .
3.
Press the [ ] [ ] (Slow/Fast) buttons to select menu,
then press the [Song] button .
Menu Explanation
Status
This shows the wireless LAN status.
Connect Connect to a wireless LAN access point.
Option
Make settings for Wireless ID or Ad-Hoc mode (p. 47).
In the explanations in this Chapter, procedures will be
indicated using arrows, like this: "Wireless" g "Status."

Status Indication

This shows the wireless LAN status.
1.
g
Select "Wireless" "Status . "
The status screen will appear.
Display Explanation
Currently connected to the wireless LAN access point.
Signal level:
Strong
Three bars are used to indicate the signal level (the
Signal level: strength of the connected wireless LAN access point's
Middle
radio signal).
The identifier (name) of the connected wireless LAN
Signal level:
Weak
access point is shown.
The wireless USB adapter is inserted, but not
Not Con
connected to a wireless LAN access point.
NotAvail The wireless USB adapter is not inserted.
Ad-Hoc mode (p. 47).
HP506
The Ad-Hoc SSID is shown. Press the [
SSID button to display the Ad-Hoc key.
For details, refer to "What is Ad-Hoc mode?" (p. 47).
2.
Press the [ ] (Fast) button to display the IP address .
46
Connecting to a Wireless LAN Access
Point That You Select (Select AP)
This method lets you connect by choosing a wireless LAN access
point from the list that is displayed.
* Wireless standards 802.11g/n (2.4 GHz) and authentication
methods WPA/WPA2 are supported.
1.
Select "Wireless"
[Song] button .
The Select Access Point screen will appear.
An "*" symbol is shown for the currently-connected wireless LAN
access point.
2.
Press the [–] [+] button to choose the wireless LAN access
point to which you want to connect, and press the [Song]
button .
• You will be connected to the selected wireless LAN access point.
• If you're using this wireless LAN access point for the first time,
you'll proceed to the authorization (PASS) screen.
• If this is a wireless LAN access point to which you have
connected in the past, just press the [Song] button and you'll be
connected. Once successfully connected, "Success" will appear.
Authorization screen (PASS)
3.
Enter the security code (passphrase) of your wireless LAN
access point, and press the [Song] button .
How to enter characters
Use the [ ] [ ] (Slow/Fast) buttons to select the position at
which you want to specify a character. Use the [–] [+] buttons to
change the character.
* You cannot enter a space at the end of the passphrase.
Once successfully connected, "Completed" will appear.
* If you fail to connect, refer to "Troubleshooting" (p. 55).
4.
] (Fast)
Press the [Song Balance] or [AB Repeat] button to exit
Function mode .
g g
"Connect" "Select AP," then press the