Adjusting The Projected Image; Adjusting The Projector Height - ViewSonic J658D User Manual

Adjusting the Projected Image

Adjusting the Projector Height

Elevator button
The projector s equpped wth an elevator foot to adjust the mage heght. To rase or
lower the mage:
1. Turn the projector over and locate the elevator foot. Press the elevator button to
extend the foot so t may be adjusted.
2. Whle holdng down the elevator button, adjust the foot to the desred heght, then
release the button to lock the elevator foot nto poston.
3. Use tilt-adjustment foot to fine-tune tilt-adjustment.
4. Lower the projector so t rests on ts foot; adjust as needed.
To avoid damaging the projector, make sure that the elevator foot and tilt-
adjustment foot are fully retracted before placing the projector in its carrying
case.
ViewSonic PJ658D
2
Elevator foot
3
Tlt-adjustment foot
3
18