Safety Instructions - Candy A 9002 Installation & User Manual

Safety Instructions

Please read the instructions in this booklet carefully because they contain
important information on how to install, use and maintain your dishwasher safely
as well as containing useful tips on how to make the most of it.
Keep this booklet carefully for future reference.
There are certain basic safety rules which are valid for any domestic appliance.
They are the following:
-
never touch the appliance when your hands or feet are wet or damp
- do not use it when your feet are bare
-
do not remove the plug from the mains supply socket by pulling the mains
cable or the machine itself
-
do not leave the appliance exposed to the elements (rain, sun etc)
- do not let children (or others incapable of operating it) use the machine
without supervision
- make sure that the plug fitted to the machine is compatible with the power
supply socket. If it is not, get a suitably qualified person to fit the correct type,
and to make sure that the cables to the mains socket are able to cope with
the power rating of the appliance
- ensure that the dishwasher does not crush power cables
-
if there is a water softening device installed in the home there is no need to add
salt to the water softener fitted in the dishwasher
- the dishwasher is designed for normal kitchen utensils.
Objects that have been contamined by petrol, paint, traces of steel or iron,
corrosive chemicals, acids or alkalis must not be washed in the dishwasher
-
if you wish to dispose of an old dishwasher be careful to remove the door to
eliminate the risk of children becoming trapped inside it
- the dishwasher has been made from materials which can be recycled so that
it can be disposed of in an environmentally friendly way
-
in general it is not advisable to use adaptors, multiple plugs and/or extension
cables
If the appliance breaks down or stops working properly, switch it off, turn off the
water supply and do not tamper with it. Repair work should only be carried out
by an approved service agent and only genuine spare parts should be fitted.
Any failure to follow the above advice may have serious consequences for the
safety of the appliance.
Contents
Installation diagrams
Safety instructions
Installing the machine
Using your dishwasher
Maintenance
What to do if something goes wrong
Page
Page 44
Page 45
Page 48
Page 61
Page 62
44
INSTALLATION
After unpacking, adjust the height of the dishwasher.
For the dishwasher to work correctly it must be level. Adjust the feet so
that the machine does not tilt by more than 2 degrees. If it you need to
move the machine after removing the packaging, do not try to lift it by
the bottom of the door. Follow the instructions in figure 8. Open the door
slightly and lift the machine by holding on the top.
Important: when the appliance location is on carpet floors, attention
must be paid so as to ensure that there is no obstruction to the
bottom vents.
Make sure that the plug on the appliance remains accessible after
installation.
This appliance complies with Directives 89/336/EEC, 73/23/EEC
and following changes.
Electrical connection (220-230 V)
This appliance complies with all the international safety standards and
is fitted with a 3 pin plug with earth connection to ensure complete
earthing of the product.
In the absence of adequate earthing you will notice that when touching
the metal parts of your appliance an electrical dispersion can be felt due
to the presence of a radio interference suppressor.
Before connecting the appliance to the mains supply it is important to
ensure:
– That the supply socket is properly earthed.
– That your electricity supply is capable of meeting the consump-
tion requirements listed on the rating plate of your appliance.
Important: manufacturer declines all responsibility for any damages
due to nonearthing of the machine.
For U.K. only (240 V)
Plug it in
Plug the appliance into the power socket.
If the plug we supply does not fit
• CUT IT OFF AND DESTROY IT!
You can't use it on other appliances, and the exposed wires could be
dangerous if anyone plugged it in.
• Fit a suitable plug, as follows:
Connect
2
green and yellow wire
blue wire
brown wire
to the terminal in the plug
marked with the letter E,
OR marked with the Earth symbol,
OR coloured green,
OR coloured green and yellow.
marked N
OR coloured black.
marked L
OR coloured red.
45