Door Reversal - Zanussi ZCL911W Instruction Booklet

Refrigerator zcl911w
Table of Contents

Advertisement

Door Reversal

1. Close the cabinet and remove the plug from the
electrical socket.
2. Remove the ventilation grille. There is a part on
the grille that can be removed. Reposition it and
transfer to the opposite side.
3. Support the appliance on a wooden block when it
is laid down. This will make it easier to grip under
the appliance when returning to an upright position.
4. On the upper part of the appliance. Remove the
hinge pin and replace on the other side.
5. On the lower part of the appliance. Unscrew the
hinge. Move the hinge pin and plastic cover. Secure
the hinge on the other side.
6. Raise the appliance and replace the ventilation
grille.
7. Unscrew the handle. Carefully press in the plastic
plugs on the opposite side using a punch. Secure the
handle in the plug holes. Then press the supplied
plastic plugs into the holes to which the handle was
previously fitted.
8. Put the appliance in position. Check that it stands
straight. See the section "Positioning the appliance".
1
2
3
4
5
7
12
Zanussi 818 20 92-00/0

Advertisement

Table of Contents
loading

Table of Contents