The Status field shows whether your device is Connected or
4.
Disconnected from Wi-Fi Direct.
Tap Disconnect Wi-Fi Direct when you are ready to
5.
disconnect your device.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
From the Home screen, tap
network
Bluetooth settings and tap Bluetooth to turn it on.
➔
Note: Bluetooth must be enabled prior to use.
Device Name
Activate Bluetooth. For more information, refer to "Turning
1.
Bluetooth On and Off" on page 122.
From the Home screen, tap
2.
network
➔
Bluetooth settings and tap Device name. The
assigned device name displays.
Settings
Wireless and
➔
➔
Settings
Wireless and
➔
➔
Press
to erase the current device name and enter a
3.
new name for this device using the keyboard.
Press OK to confirm your setting.
4.
Visible
From the Home screen, tap
network
Bluetooth settings and tap Visible.
➔
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
phone becomes invisible again.
Visible time-out
Visible time-out option allows you to make your device visible for a
certain time limit and become invisible. This option can only be
accessed when your device is set to Visible.
From the Home screen, tap
1.
network
Bluetooth settings and tap Visible time-out.
➔
Tap 2 Minutes, 5 Minutes, 1 Hour, or Never.
2.
Scan for devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
From the Home screen, tap
1.
Settings
Wireless and
➔
➔
➔
Settings
➔
Wireless and
Settings
Wireless and
➔
➔
Changing Your Settings
89