Belkin F9J1105 User Manual page 12

gETTing sTaRTED
Manually
If you choose not to use the included Setup CD for
adding additional computers or wireless devices, you
can manually add these items to your network .
1 . Locate the wireless-network-connections option
on your computer or wireless device .
2 . Select your Belkin Router from the list of available networks . You
can identify your Belkin Router by locating the network name
(SSID) from the card located underneath the foot of your Router .
3 . Enter your network password (located on
your network information card) .
Your wireless device will take a few moments to connect to your
network . If the connection is not made the first time, try this
process again . If you still have difficulty connecting to your network
after trying this process a few times, see the "Troubleshooting"
section in this manual for help with connecting to your network .
note: In some cases you may be prompted to select the
security type . It is printed on the card for your convenience .
10