Table of Contents
Advertisement
ConTrol CenTer oPTIons
sections
table of contents
You can specify general settings such as whether you want the Control Center software to start when you start your computer, how
you want to update Control Center software, and more.
To access "Control Center Settings" properties, click "Tools > General" or "Tools > Connected Home Bases" in Control Center.
General settings
On the "General" tab, you can specify when you want Control Center to
start and the types of notifications you want to see.
Home Base
1
2
3
4
5
6
7
8
If you check "Start Home Base Control Center when Windows Starts",
any devices to which you choose to automatically connect will be ready
for use when you start your computer. For more information, see the
"Device Properties" section.
The "Show the Home Base Control Center" check box makes Control
Center appear each time you start the computer.
Under "Notification" you can specify which notifications you want to
see. Mark check boxes to:
1 .
notify me when the device connection is lost – to inform you when
the connection to a USB device is lost. This is enabled by default.
2 .
remind me that devices should not be in use whenever I
disconnect a device – to remind you that you should ensure
a device is not in use before disconnecting. For example,
disconnecting a storage device while files are open could result in
data loss. This is disabled by default.
You may also specify how often you want the device list to be refreshed.
This rate determines how often Control Center updates the status of
attached devices.
24
9
10
11
12
13
14
15
Advertisement
Table of Contents
