Table of Contents
Advertisement
tRoUBleSHootiNG
SectioN
table of contents
installation cD-RoM does not start Belkin
Wireless Networking Utility installer .
if the cD-RoM does not start the Belkin Wireless Networking Utility
installer automatically, it could be that the computer is running other
applications that are interfering with the cD drive . if the Belkin Wireless
Networking Utility installer screen does not appear within 15-20
seconds, open up your cD-RoM drive by double-clicking on the "My
Computer" icon. Next, double-click on the CD-ROM drive in which the
installation cD has been placed to start the installation . if the installation
does not start automatically, right-click to select "Explore", then double-
click on the icon named "setup.exe".
Power leD does not come oN; Adapter is not working .
if the leD indicators are not oN, the problem may be that the Adapter
is not connected or installed properly . Verify that the Adapter is plugged
firmly into the USB port of your computer . check to see that the drivers
for the Adapter have been installed . Right-click on the "My computer"
icon on your desktop . choose "Properties" and navigate to the "Device
Manager" and see if your USB Network Adapter is listed without any
errors . if an error is indicated, contact Belkin technical Support .
Double N+ Wireless USB Adapter
1
2
3
4
link leD is blinking slowly; i cannot connect to a wireless network
or the internet .
if your Adapter appears to be functioning properly, but you cannot
connect to a network or you have a red wireless icon at the bottom of
your screen, the problem may be that there is a mismatch between the
network name (SSiD) settings in your wireless network properties .
check the SSiD settings to see if they match . the SSiD is case-sensitive
and the spelling on each computer must be exactly the same in order for
the Adapter to connect to the wireless router (or access point) .
Note: to check the SSiD settings or look for an available network,
double-click the Signal indicator icon to bring up the "Wireless
Networks" screen . click "Add" if you do not see the network you are
trying to connect to and type in the SSiD .
For more information about setting up an SSiD, please reference your
router manufacturer's user manual . if issues persist even at close range,
please contact Belkin technical Support .
42
5
6
Advertisement
Table of Contents
