Unpacking; Damages; Use; Building-In - Zanussi DCS11 Instruction Booklet

Unpacking

Damages

If the dishwasher has been damaged during transport,
you should immediately notify the company responsible
for delivering it.
Check that the dishwasher is undamaged. If you discover
any damage, faults or that anything is missing, you should
notify the dealer immediately.
Never leave packaging material in a place where
children may play with it.
Check that the following accessories are supplied with the
dishwasher when you unpack it:
• Elbow for discharge hose

Use

This dishwasher is designed solely for washing household
utensils suitable for washing in a dishwasher. Using it for
other purposes may damage it and invalidate the guarantee.

Building-in

If you want to build the dishwasher into your kitchen furni-
ture, it is important to use our approved build-in kit. This
comes with the correct instructions needed to observe all
the relevant regulations. You can obtain the build-in kit
from the same place where you bought the dishwasher.
Protecting the machine against
freezing
If the dishwasher is placed in an environment where the
temperature sometimes falls below 0° C, there is a risk
that the small amount of water which remains inside the
parts of the dishwasher will freeze and damage it.
To prevent this you should:
1. Turn off the water supply to the dishwasher.
2. Disconnect the water inlet and discharge hoses.
3. To empty the inlet valve; select a wash programme,
and let the programme run for a few seconds.
The appliance is only to be used and stored
indoors at normal room temperature. The manu-
facture is not responsible for any frost damage.
- 10 -