Pcl5E Specific Options - Oce im2330 Printing Manual

PCL5e Specific Options

Some of the options only apply to plain text or PCL5e files.
Text Wrapping
The following options control text wrapping when it reaches the right margin.
Option Value
wrap
nowrap
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to specify wrapping is "lp -o wrap filename".
Left Margin
The left margin position can be specified with the following option.
Option Value
lm=value
If the left margin is set to the right of the right margin it will be ignored.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the left margin to five columns is "lp -o lm=5 filename".
Right Margin
The right margin position can be specified with the following option.
Option Value
rm=value
If the right margin is set to the left of the left margin or if it is set to a position wider than the logi-
cal page it will be ignored. The right margin is specified in columns from the left margin. A nega-
tive value will be ignored.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the right margin to fifty columns is
"lp -o rm=50 filename".
Top Margin
The top margin position can be specified with the following option.
Option Value
tm=value
Alternate
Value
Enable automatic text wrapping.
Disable automatic text wrapping.
Alternate
Value
Set the left margin to value columns.
Alternate
Value
Set the right margin to value columns.
Alternate
Value
Set the top margin to value lines.
Description
Description
Description
Description
Printing from an Application 319