Advertisement
Place blade on hilt and hold it in place.
HILT
STEP 4
Choose a sleeve ring and slide it over the blade.
SLEEVE RING
Choose a hilt sleeve and slide it on the hilt.
SLEEVE
NOTE: Line up rib inside sleeve with slot on hilt.
NOTE: When customizing your lightsaber, always make
sure the button is exposed so that you can "power up"!
STEP 6
Choose an end cap and attach it to the hilt.
END CAP
FINISHED
5
Congratulations! You have assembled your lightsaber!
STEP 3
BLADE
STEP 5
CUSTOMIZE
The above steps are the basic steps for building
a lightsaber. Switch and combine the parts to
customize your lightsaber!
NOTE: Some configurations will cover the power
button. Please be sure that the power button is
exposed when completing your configuration.
POWER UP
Practice your dueling skills! Press the
button to "power up" your lightsaber.
When customizing your lightsaber, always make sure
the button is exposed so that you can "power up"!
6
Advertisement
