Table of Contents
Advertisement
WAX BUILDUP AROUND EACH EARPHONE NOZZLE
SHOULD BE REMOVED USING THE WAX REMOVAL LOOP
S
Wipe down the case and cable with an antiseptic after each use. Stop using the
earphones if they are causing great discomfort or infection.
NOTE: Nozzles can collect cerumen (earwax), which can clog the earphone and lower the
sound quality. If you experience sound loss, check the nozzles for clogging before sending
the product in for service. There is a service charge for removing wax.
For service in the U.S., return earphones to:
Shure Incorporated,
Service Department,
222 Hartrey Avenue,
Evanston IL 60202-3696,
U.S.A.
WAX GUARD
You should place wax guards on the nozzle of your E2c earphones before using them.
To place a Wax Guard on one of your E2c earphones:
1. Remove the sleeve from the earphone nozzle.
2. If there is a dirty wax guard on the earphone, peel it off.
3. Clean the tip of the E2c nozzle with an antiseptic or alcohol wipe.
ENGLISH
EARPHONES
WAX REMOVAL LOOP
FIGURE 1: E1c/E5c Wax Removal
NOZZLE
7
Advertisement
Table of Contents
