Hitachi CP-X8150 User Manual page 21

3.7 Important information for Intellectual Stack
● The Main and Sub projectors have the following common settings.
- AV MUTE (Operating Guide
- Magnifying feature
- ASPECT and OVER SCAN
- COMPUTER IN
- MESSEAGE
- MY BUTTON
- TEMPLATE (Operating Guide
- Lens shade (Operating Guide
- SHADE TIMER
- SOURCE SKIP
- PbyP (Operating Guide
<Only for CP-WU8440 and CP-WU8450>
● The following functions are disabled.
- Executing of AUTO KEYSTONE
Guide → SETUP
- STANDBY MODE
menu)
- AUTO SEARCH
- Turning on/off AUTO KEYSTONE
OPTION menu)
- DIRECT POWER ON
- AUTO POWER OFF
- COMMUNICATION TYPE
→ COMMUNICATION)
● The input source from the following ports cannot be selected.
- USB TYPE A, USB TYPE B, LAN
● <Only for CP-WU8440 and CP-WU8450>
When the projectors are in the PbyP mode, SUB INPUT SOURCE is fixed to
FOLLOW MAIN UNIT.
● When Intellectual Stack is in use, an error message will be displayed if an error
occurs on any of the projectors.
When an error occurs, a full dialog will be displayed on screen. The full dialog
changes to a small dialog after about 20 seconds without any key activity. While
the small dialog is displayed, pressing the ◄ button displays a full dialog again.
The numbers "1" and "2" above the projector icons represent the Main and Sub
projectors respectively.
Refer to the on-screen messages as shown below and take the necessary
actions to resolve the problem.
(continued on next page)
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
→ PbyP)
menu)
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(continued)
→ Temporarily turning off the screen and
→ Using the magnify
→ INPUT menu)
→
SCREEN menu)
→ OPTION menu)
→ SCREEN menu)
→ Temporarily shading the
→ OPTION
→ OPTION
(Operating
→
SETUP
→
OPTION
(Operating Guide
→ OPTION
→ OPTION
21
STACK menu settings
feature)
→
IMAGE menu)
screen)
menu)
menu)
Full dialog
menu)
→
menu)
menu)
→ OPTION menu
audio)
Small dialog
→ SERVICE